[ Back | Print ]
Technical Information Document
SYS Volume on NSS pool won't mount. - TID10086744 (last modified 30JAN2004)
printer friendly tell a friend
Click here if this does not solve your problem
10086744 10086744 10086744

SYS Volume on NSS pool won't mount.


NetWare 6.5

The customer is using the NSS Snapshop feature.


The boot$log shows the error "Volume SYS could NOT be mounted.  Some or all volume segments cannot be located.  If this is an NSS volume, the pool may need to be activated using the command nss /poolactivate=poolname."

Running verify produces the error "System data I/O error 20202(zio.c[1996]"

Running a rebuild produces an "20444" nss error.


The snapshot was also placed on the SYS pool.  The snapshot either grew too large, or was causing a conflict of some kind.


Manually delete the snapshot which will then allowed the rebuild to complete.  This can be done with the command MM SNAP DELETE ALL.  When dealing with a cluster this command must be done on the active node.

Document Title: SYS Volume on NSS pool won't mount.
Document ID: 10086744
Solution ID: NOVL92244
Creation Date: 05SEP2003
Modified Date: 30JAN2004
Novell Product Class: NetWare


The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.

Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.

[ Back | Print ]